Zanglamaydigan po'lat
Kesilgan zanglamaydigan polosa
Kesilgan polosa 304 / 316L / 430 — kengligi 8 mm dan, qalinligi 0.3–3 mm, shtamplash uchun burr nazorat qilinadi.
3–3 mmQalinligi
8–1500 mmKengligi
Mavjud spetsifikatsiya
| Markalar | Qalinligi | Kenglik / diametr | Standart |
|---|---|---|---|
| 304 · 316L · 430 | 0,3–3 mm | 8–1500 mm | ASTM A240 / EN 10088-2 |
Ko'rsatilgan diapazonlar standart mavjudlikni bildiradi; nostandart o'lchamlar buyurtma asosida tayyorlanadi. Qalinlik nominal — bardoshlik ASTM A480 / EN 10088-2 bo'yicha baholanadi.
Odatdagi qo'llanilishlar
- Tor shtamplangan qismlar
- Quvur va truba ishlab chiqarish
- Shlang qisqichlari va mahkamlagichlar
Yetkazib berish va tekshiruv
- So'rov bo'yicha burr balandligi ≤ 0,05 mm (yuqori tezlikda shtamplash uchun muhim)
- Chet holati: kesilgan yoki burr tozalangan
- Eslatma: 100 mm dan tor kenglikda kesish yo'qotishi 3–5% ga yetadi — biz chiqimni taklif qilamiz
Narx taklifi yoki texnik yordam kerakmi?
Marka, o'lcham, miqdor va manzil portini yuboring — 24 soat ichida FOB / CIF bilan javob beramiz.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Tube making — welded tube, decorative tube, heat exchanger tube strip
- Stamping — cookware, locks, hardware blanks
- Cable tray and brackets — continuous roll-formed strip
- Automotive — clamps, trim strips, seal carriers
- Electronics — spring contacts, shields, battery shells
Selection FAQ
- What is the narrowest slit width?
- 8 mm is standard. Narrower needs an assessment of edge burr and coil winding quality — tell us the application when enquiring.
- What burr height do you hold?
- Within 0.05 mm as standard. For stamping or blanking, tighter limits can be agreed in the order.
Not sure which grade fits? Use the grade selector